Tile Grouts

Tile Grouts

Tile Grouts

Tile Grout is used to fill the spaces between tiles and support them on the surface of installation. Tile Grout comes in various colors and shades, and it keeps your tile from expanding and shifting with the change in temperature and moisture level.

There are three traditional types of grout available for tile installation, as well as advanced formulas engineered for color consistency and durability. While you should always research a Tile grout that caters to your specific project, the basic three types are cement, pre-mixed, and epoxy.

Epoxy grout is considered by many in the industry to be a superior choice for any kind of tile project. Epoxy grout is durable, doesn't need to be sealed, is stain and chemical resistant, and can withstand high traffic and moist areas.

Can you lay floor tile without grout lines?

Even with rectified tiles, it is not recommended to lay tiles without grout. Grout helps to protect the tiles against movement in case of the house shifting, it also helps make the tiles easier to care for in wet areas.

What is the ratio for mixing grout?

Grout to Water Ratio

When mixing grout, the right ratio of water to mix will come together easily so the tile can be sealed and set without mess and dust to clean up later. The grout to water ratio is typically 1:1. Always check the manufacturer's directions for the grout mix you have chosen to use.

Anxin cellulose ether products HPMC/MHEC can improve by the following properties in tile grout :

·Provide suitable consistency, excellent workability, and good plasticity

·Ensure the proper open time of the mortar

·Improve the cohesion of the mortar and its adhesion to the base material

·Improve sag-resistance and water retention

Recommend Grade: Request TDS
MHEC ME60000 Click here
MHEC ME100000 Click here
MHEC ME200000 Click here